Candle Burning Tips:

To achieve maximum performance of your candle, place your candle in an area free of drafts and trim your wick to 1/4″ before lighting each time.

Since soy wax has what’s called a “memory,” it’s crucial that the melt pool reaches all edges of the container on the first burn, you may achieve this by burning for 3 to 4 hours. This is to ensure the wax has a full and even melt pool.

Only allow the candle to burn 2 to 4 hours each time. After you blow your candle out, let it cool and check the wick.

Gently guide it back towards the center, as candle wicks tend to wiggle around and get out of place. If soot forms on the inside of the vessel, extinguish the candle, wait for it to cool, then wipe with a clean damp cloth.

Trim the wick and relight. You may use a candle snuffer to snuff out the wick and a candle trimmer to cut down the wick before each use.

The wick should be cut down to 1/4 of an inch.

Caution:


Failure to follow instructions could result in fire hazard or injury. Keep wax free of matches, wick trimmings, or other flammable materials. Keep wick centered & trimmed to 1/8″ to ensure even burning & prevent the flame from becoming too large. Burn only on stable heat resistant surface for no more than 4 hours at a time. Keep away from drafts, high traffic areas, and vents. Discontinue use when 1/2 an inch of wax remains in the bottom of the container. Do not move candles while burning or if the is liquid. Keep out of reach of children & pets. Do not burn unattended!